Your new Electric Bicycle/scooter is a revolutionary new transport product using a sealed lead
acid batteries and a super high efficiency electric hub motor designed to ASSIST in the propulsion
of you and your bicycle. It is important to note the following riding guidelines to ensure you get
the best possible experience from your electric bicycle.
A) When starting off from a stand still pedal the bicycle up to speed then engage throttle for best
results.
B) On inclines pedaling will be required to maintain momentum.
C) Remember performance of the bike is directly related to weight of the rider and any
baggage/load together with the charge in the batteries.
D) Ensure batteries are fully charged prior to riding.
E) Never let the batteries fully discharge. This will reduce battery and bike performance.
F)
If your bike is equipped with lights we recommend you ride with them switched on at all
times to increase visibility for you and other road users.
Charging
Charging (see figure 1-4)
Ensure bike is turned off and key is removed.
A.
B
First connect to the battery charger to the charging socket located below the front of the seat.
(Optionally, you can also remove the battery pack and charge outside of the bike if preferred)
C.
Then insert the power plug on the battery charger into 110v power outlet.
Operation
Riding tip checklist
Battery Charging and & Battery Safety
figure 1-4
14