Programming The Date; Manually Programming A User Name - Polar Electro E600 User Manual

7. Using either button on the right will alter the value of this
number. Lock in your choice by pressing the red button.
8. Now you can return to the Time of Day by holding down the
blue button, or you can press the upper right button to set the
date. If you decide to set the date now, begin with step 4 below.

Programming the Date

1. From Time of Day display, press the upper right button two
times. Your display will read, "OPTIONS".
2. Press the red button once and the upper right button twice.
Your screen will read, "WATCH SET".
3. Press the red button once and the upper right button once.
"DATE" will be on the top line and the lower line will show
the month, day and year in numeric form.
4. Press the red button once and the month number will begin
to flash.
5. Pressing either button on the right side will alter the month.
Lock in your choice by pressing the red button. The day
number will begin to flash.
6. Pressing either button on the right side will alter the day. Lock
in your choice by pressing the red button. The year number
will begin to flash.
7. Pressing either button on the right side will alter the year.
Lock in your choice by pressing the red button.
8. Press and hold the blue button to return to the Time of Day.
Note: If you have chosen to keep time by using the 24 hour
clock, the date will be presented in a different order. The order
will now be day, month, year. Regardless of order, you can set
the date by the directions above.
18
E600 USA C manual.pm6 18-19

Manually Programming a User Name

In the Time of Day screen, you can choose between four
alternatives in the top row. You can switch between them by
pressing and holding the upper right button for each selection.
Your choices are:
1. Date
2. User name (E600 as default, can be set as described below)
3. Monitor ID (set to zero by default, can be set via Computer
Upload)
4. Logo (Polar logo as default, can be set via Computer Upload)
You can manually program a user name into your E600. For
example, if you teach at George Washington Middle School, you
might put "GWMS".
Note: You can also do this more quickly by uploading this data
from your computer.
Programming a User Name
1. In the Time of Day screen, repeatedly press and hold the upper
right button until "E600" appears on the top row. (It is right
after the date display.)
2. Press and hold the signal button on the upper left side. Time of
Day will disappear. You can now start setting the user name.
3. You can set the first character by scrolling with either button
on the right side.
4. When you are satisfied with the character, you can lock it in
with the red button. At this time the next character will begin
to flash. Each character can be set in the same way.
5. When everything is set to your liking, you can lock in the
entire user name by pressing and holding the blue button.
Note: If you have made a mistake, or if you want to change
the entire user name, press and hold the blue button to get to
the Time of Day, and start again from step one.
19.11.2002, 15:27
19