General System Setup; Front Panel Introduction; Led Definition - Speco DVR-4TH User Manual

User's Manual
3.

General System Setup

Before operating the DVR-4TH/ 8TH/ 16TH series unit, some general
configuration should be setup in advance. The following subsections will
introduce functional keys on the front panel and general configuration of the
DVR-4TH/ 8TH/ 16TH series unit.
The regularly displayed OSD information and its positions are shown in the
following figure. The title of the channel is displayed on the upper left-hand
corner of the window, either in full screen mode or in multiple-channel mode.
The current operating mode, including Call mode, Dome Control mode,
Playback mode, Freeze mode and Sequence mode, is displayed on the lower
left-hand corner of the screen. The date/ time information is displayed on the
lower right-hand corner of the screen.
3.1

Front Panel Introduction

The functional keys on the unit's front panel enable users to control the unit
and preset programmable settings.
3.1.1

LED Definition

The LED indication lights of the DVR-4TH/ 8TH/ 16TH series unit on the front
panel are described as follows.
20
Ch1
►*1 2008/10/22 PM 04:31:55
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 01/09