Host Name; Ddns Port; Submit/ Update - Speco DVR-4TH User Manual

Host Name

This item allows the user to setup a domain name, which is used when
entering the DVR-4TH/ 8TH/ 16TH series unit through the Internet on your
remote PC.
To setup the Host Name of the unit, follow the steps.
• Select <Host Name> from DDNS Setup menu and press ENTER. A virtual
keyboard displays as shown.
• Use Direction keys to select a character.
• Press ENTER to add the selected character to the Host Name entry field.
• When done, move the cursor to <OK> and press ENTER to save the
settings and exit.

DDNS Port

This item allows the user to setup the port for DDNS. Press UP / DOWN
Direction keys to change the port.

Submit/ Update

When done, move the cursor to this item and press ENTER to submit the
settings.
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 01/09
A B C D E F G H I
N O P Q R S T U V W X Y Z
a b c d e f g h
n o p q r s
0 1 2 3 4 5 6 7 8 9 .
# − _ , " + = *
◄ ►
Cancel
NOTE: No any two DVR-4TH/ 8TH/ 16TH series units should be set to
the same Host Name.
NOTE: If there are two DVR-4TH/ 8TH/ 16TH series units set with the
same domain name, the later setting will not be submit successfully.
Host Name
J K L M
i j k
t u v w x y z
Backspace Delete
OK
l m
! @
User's Manual
83