5.3.2.1
IP Camera Select
Select the corresponding channel. If <IP Camera Support> is set to <1>, then
the last channel will be the corresponding channel for the IP camera. When
<IP Camera Support> is set to <2>, the last two channels can be used to
setup the IP cameras.
5.3.2.2
IP Camera Title
This item allows the users to change the title of each connected camera. By
default, the titles of cameras are numbered from 1 through 16 respectively.
The title will be displayed on screen after the changes of the titles are set.
Follow these steps to enter a new title for a camera.
• Move the cursor to <Camera Title> and press ENTER. A virtual keyboard
with alphanumeric characters is displayed as below.
• Use Direction keys to select character.
• Press ENTER to add the selected character to the entry field.
• When it's done, move the cursor to <OK> and press ENTER to save the
settings and exit.
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 01/09
1. IP Camera Select
2. IP Camera Title
3. Hostname/IP
4. Model
5. Connection Setup
6. Device Setup
7. Activated
8. Status
A B C D E F G H I
N O P Q R S T U V W X Y Z
a b c d e f g h
n o p q r s
0 1 2 3 4 5 6 7 8 9 .
# − _ ,
◄
►
Cancel
IP Camera
IP Camera Title
J K L M
i
j
k
t u v w x y z
" + = *
Backspace
Delete
OK
CH16
CH16
No
l m
! @
User's Manual
93