Record Setup; Record Mode Setup; Record Resolution - Speco DVR-4TH User Manual

User's Manual
5.4

Record Setup

The following three factors will effect the total record time of the DVR-4TH/
8TH/ 16TH series unit:
• HDD capacity
• Recording rate (Picture per Second)
• Image quality settings
The greater the recording rate and the higher the quality setting, the shorter
the recording time. Most of the related factors can be set here in this
submenu.
The Record Setup menu allows user to set recording quality, recording
schedules, and other recording parameters. The account with appropriate
privilege is required to access Record Setup menu. In the Main menu, move
the cursor to <Record Setup> and press ENTER. The following menu is
displayed.
10. Purge Data
5.4.1

Record Mode Setup

The Record Mode Setup menu is for selecting resolution and recording format.
The relative record settings, such as preset configuration, will follow the
record mode setting. The menu displayed as the following.
5.4.1.1

Record Resolution

Select resolution of the recorded video. If the recording is set to NTSC system,
the selections are 720*480, 720*240, and 352*240. If the recording is set to
PAL system, the selections are 720*576, 720*288, and 352*288.
98
1. Record Mode Setup
2. Schedule Setup
3. Preset Config
4. Per Camera Config
5. ezRecord Setup
6. Data Lifetime
7. Pre-Alarm Recording
8. Circular Recording
9. Audio Recording
1. Record Resolution
2. Record Format
3. Max Rec. PPS
Record Setup
Record Mode Setup
Best Quality
0 Days
15 Sec
ON
ON
352*240
H264
120
DVR-4TH/8TH/16TH Series
SPECO TECHNOLOGIES 01/09