Water Temperature; Control Panel Functions; Lcd Screen Functions - Sundance Spas Maxxus Installation & Owner's Manual

• The time required for initial heat-up will vary depending on the starting

water temperature.

DANGER: RISK OF INJURY. ALWAYS CHECK WATER TEMPERATURE
CAREFULLY BEFORE ENTERING HOT TUB. DO NOT EXERCISE IN
WATER ABOVE 90 DEGREES F (32 °C).
These display temperature
setting and increase or decrease
temperature setting and other
programmable features.
Inverts the Controls the hot tub
main 4-digit light (bright, dim,
display. dimmer, off).
Indicates panel, set tempera-
ture or Skimming/Heating
cycle programming locked.
These charac-
ters identify
what is being
shown on the
main 4-digit
display
Indicates pro-
grammed filter
cleaning inter-
val has elapsed
(page 30).
Indicates hot tub light is
on (changes according to
brightness selected).

Control Panel Functions

Scrolls menu through
Skimming/Heating cycle
programming features.
(LCD screen not shown)
Controls Controls
2-speed high
Pump #1. speed
pump #2.

LCD Screen Functions

Indicates heater is
on (page 14)
Indicates 2-speed pump #1 is on.
Icon appearance does not change
from high to low speed.
Figure -D
Select
Controls Displays time of day and
high initiates time setting and
speed locking functions.
Pump #3.
Figure-E
Indicates optional SunZone
TM
sanitizer is on.
Indicates high speed pump
#2 is on.
Accesses Skimming/Heating
cycle program mode and
advances display to next cycle.
Cycle
Mode
Display
Switches between
standard and economy
Skimming/Heating
modes (page 27-28).
Indicates Skimming/Heating cycle
in progress or displays cycle pro-
gramming features (page 29).
Indicates operating
mode selected
(page 28).
Indicates high speed pump #3
is on.
Page 15