Acer 11b User Manual page 23

Fixed IP
IP Address
Subnet Mask
Default Gateway
PPPoE
User Name
Password
Connection Type
Idle Time
Attain DNS
Click to select fixed IP support on WAN interface. There
are IP address, subnet mask and default gateway settings
need to be done.
If you select the fixed IP support on WAN interface, fill
in the IP address for it.
If you select the fixed IP support on WAN interface, fill
in the subnet mask for it.
If you select the fixed IP support on WAN interface, fill
in the default gateway for WAN interface out going data
packets.
Click to select PPPoE support on WAN interface. There
are user name, password, connection type and idle time
settings need to be done.
If you select the PPPoE support on WAN interface, fill in
the user name and password to login the PPPoE server.
If you select the PPPoE support on WAN interface, fill in
the user name and password to login the PPPoE server.
Select the connection type from pull-down menu. There
are Continuous, Connect on Demand and Manual three
types to select.
Continuous connection type means to setup the
connection through PPPoE protocol whenever Acer
WLAN 11b Broadband Router is powered on.
Connect on Demand connection type means to setup the
connection through PPPoE protocol whenever you send
the data packets out through the WAN interface; there are
a watchdog implemented to close the PPPoE connection
while there are no data sent out longer than the idle time
set.
Manual connection type means to setup the connection
through the PPPoE protocol by clicking the Connect
button manually, and clicking the Disconnect button
manually.
If you select the PPPoE and Connect on Demand
connection type, fill in the idle time for auto-disconnect
function. Value can be between 1 and 1000 minutes.
Click to select getting DNS address for DHCP, PPPoE
19