Lan Interface Setup - Acer 11b User Manual

3.3.6 LAN Interface Setup

This page is used to configure the parameters for local area network that connects
to the LAN ports of Acer WLAN 11b Broadband Router. Here you may change
the setting for IP address, subnet mask, DHCP, etc.
Screenshot – LAN Interface Setup
Item
IP Address
Subnet Mask
Default Gateway
DHCP Server
DHCP Client Range
previous configuration setting.
Description
Fill in the IP address of LAN interfaces of Acer WLAN
11b Broadband Router.
Fill in the subnet mask of LAN interfaces of Acer WLAN
11b Broadband Router.
Fill in the default gateway for LAN interfaces out going
data packets.
Select to enable or disable the DHCP server function on
LAN interfaces from pull-down menu.
Fill in the start IP address and end IP address to allocate a
range of IP addresses; client with DHCP function set will
be assign a IP address from the range.
16