Wan Interface Setup - Acer 11b User Manual

Show Client
802.1d Spanning Tree Select to enable or disable the IEEE 802.1d Spanning
Clone MAC Address
Apply Changes
Reset

3.3.7 WAN Interface Setup

This page is used to configure the parameters for wide area network that connects
to the WAN port of Acer WLAN 11b Broadband Router. Here you may change
the setting for IP address, PPPoE and DNS, etc.
Click to open the Active DHCP Client Table window that
shows the active clients with their assigned IP address,
MAC address and time expired information.
Tree function from pull-down menu.
Fill in the MAC address that is the MAC address to be
cloned.
Clone MAC address is designed for your special
application that request the clients to register to a server
machine with one identified MAC address.
Since that all the clients will communicate outside world
through Acer WLAN 11b Broadband Router, so have the
cloned MAC address set on Acer WLAN 11b Broadband
Router will solve the issue.
Click the Apply Changes button to complete the new
configuration setting.
Click the Reset button to abort change and recover the
previous configuration setting.
17