INSPECTION AND MAINTENANCE
CHECKING THE OIL
Check engine oil each time prior to operating mini bike.
The oil level should be between upper and lower lines of oil gauge.
1.
Set the Mini Bike on level ground, screw off the oil gauge plug, wipe the oil
gauge rod clean and then insert the gauge plug into the crankcase again to
check the oil level. There is no need to screw the oil gauge plug completely in
the hole to check the oil.
2.
Add lubricating oil up to the edge of the fuel plug.
3.
Screw oil gauge plug tightly.
CAUTION
!
Never start the engine when there is insufficient lubricating
oil. Otherwise, it will cause harm to the engine.
Lubricating Oil Recommended
The lubricating oil is an important factor affecting the performance and service life
of the engine. Please refer to the chart for the correct grade of engine oil based on
the environmental conditions in your area. Do not use any other type of oil other
than what is recommended in the chart. DO NOT MIX OIL WITH THE GASOLINE.
.45L (.40qt.) Oil
Lubricating oils of different
viscosity shall be employed
in different regions and at
different temperatures.
MACHINE
OIL
-20
-30
°C
TEMP.
-4
-22
°F
14
Oil dip stick
20W-40 20W-50
15W-40 15W-50
10W-40
10W-30
-10
0
10
30
20
14
32
50
86
68
40
104