section 2: poWer supply
availability
Electrocution,
equipment damage may
occur if machine is not
correctly grounded and
connected to the power
supply.
full-load current rating
full-load current rating at 220v ..... 25 amps
Model g0634Xp (Mfg. 4/11+)
circuit requirements for 220v
nominal voltage .............................. 220v/240v
cycle ..........................................................60 hz
phase .................................................... 1-phase
circuit rating ...................................... 30 amps
plug/receptacle ...........................nema l6-30
cord .........3-Wire, 10 aWg, 300vac, "s"-type
fire,
or
For your own safety and protection of
property, consult a qualified electrician if
you are unsure about wiring practices or
electrical codes in your area.
Note: The circuit requirements listed in this man-
ual apply to a dedicated circuit—where only one
machine will be running at a time. If this machine
will be connected to a shared circuit where mul-
tiple machines will be running at the same time,
consult a qualified electrician to ensure that the
circuit is properly sized for safe operation.
-7-