Making A Test Strip - Oce 7055 User Manual

Making a test strip

In some cases you want to check the exposure settings and the quality without
wasting a complete copy. If this is the case, you can make a test strip. A small
part of the original is copied on a strip. This test strip is cut the minimum length
of 420 mm.
Making a test strip
Press the operating mode button and select the standard operating mode. The
1
symbols in the display and next to the standard operating mode indicator
light up.
Press the selection buttons until the display shows 'tESt'.
2
[10] Trailing edge buttons
Press the start button.
3
The test strip is copied and cut.
22 Océ 7055/7056 User Manual
- +
trailing
standard
edge
leading
synchro cut
edge