Table of Contents
Advertisement
6
Shortcut Operations
duAl wAtch
In standby, hold
key for over 0.5 second to enter Dual Watch
mode. The radio will scan the channel in every 5 seconds. When the radio
receives match signal, it pause scanning until the signaling disappear.
Repeat
above operation to exit Dual watch.
eMeRGencY AlARM
To start emergency alarm, hold the right volume knob until the trans
-ceiver displays ALARM and emit alarm. Re-power on the transceiver to
exit alarm. This transceiver has 4 kind of alarm which can be setup by
programming software.
chAnnel/FRequencY ScAn
F Re q uencY ScAn
14
In VFO mode, this function is designed to monitor signal of every
communicative frequency point of "step size" you have set.
11
In VFO mode, press the Main Band
21
During the scanning adjust the Main band selector knob or press
microphone [ UP/DOWN ] key will change the scan direction.
31
Press
key to exit scan.
c h Ann el ScAn
11
In channel mode, press the Main Band
21
During the scanning, adjust the Main band selector knob or press
microphone [ UP/DOWN ] key will change the scan direction.
31
Press
key to exit scan.
chAnnel ScAn Skip
In channel mode, switch selector knob to choose the channel, then hold
key to enter channel scan.
key to enter channel scan.
for over 0.5 second, the radio prompts
"DU DU", and LCD displays "SKIP", and now
the current channel is Scan Skip.
chAnnel edit
11
In VFO mode, turn selector knob to select the desired frequency or
input frequency by MIC's numeric keys.
21
Hold
key until the transceiver prompt
DU and the display of channel number flashes.
31
Turn selector knob to select the channel number to store. (If the
storage has data , the LCD will display the
frequency, otherwise will display----------)
41
Press
key, the LCD display MEN- IN, the channel edit completed.
chAnnel copY
11
In channel mode, turn the selector knob to choose the channel.
21
Hold
key until the transceiver prompt a Du and channel number
display flashes.
31
Turn selector knob to choose channel number for storage. ( If the
storage has data , the LCD will display the frequency, otherwise will
display----------)
41
Press
key, the LCD displays MEN-IN, channel copy completed.
chAnnel delete
11
I n s t a n d b y, h o l d
transceiver prompt DU, and channel
number flashes.
21
Turn selector knob to choose channel number for delete. (If the
storage has data, the LCD will display the frequency, otherwise will
display----------)
31
Hold Main band volume knob, until the transceiver emit DU DU
prompt and LCD displays MEN-OUT, the channel delete completed.
k e y u n t i l t h e
6
Advertisement
Table of Contents
