Lifescan InDuo User Manual page 87

Why is insulin delivered when the
dose selector is turned?
You have dialled the maximum dose
of 70 units and then carried on
dialling. If you need to inject a dose
of insulin larger than 70 units, you
must divide the dose into amounts
equal to or less than 70 units.
Why does the push button block
during the injection?
Do not try to force the push button
in. The needle may be blocked.
Change the needle and prime the
InDuo™ doser as described on page
42. Check to see if Penfill
damaged. Dial back to zero 0 and
press the push button completely in
until it locks. Then open the slide
and change Penfill
page 49. Prime the InDuo™ insulin
® is
as described on
®
DISPLAY MESSAGES AND PROBLEM-SOLVING GUIDE
doser until insulin appears at the
needle-tip - see page 24. Please
observe that part of the insulin dose
may have been injected. If the push
button still cannot be pressed
completely in, call Customer Service
at your local Novo Nordisk or
LifeScan office.
Why does the slide not open when
changing Penfill
Put on a new needle. Press the push
button completely in until it locks.
Remove the needle and open the
slide. If the slide still cannot be
opened, call Customer Service at your
local Novo Nordisk or LifeScan office.
Do not try to force the slide open.
?
®
87