Lifescan InDuo User Manual page 10

10
GETTING YOUR InDuo™ SYSTEM READY FOR USE
Top edge
Apply a sample here,
where the narrow
channel meets the
top edge of
OneTouch ® Ultra™
test strip.
Confirmation
window
This is where you
confirm if a large
enough sample
has been applied
to the top edge.
Contact bars
Insert this end of
OneTouch Ultra™
®
test strip into the
InDuo™ meter.
æ OneTouch
® Ultra™ test strips
Your InDuo™ meter is designed for use only with
OneTouch ® Ultra™ test strips.
• Store the OneTouch
cool, dry place below 30°C (86ºF). Keep away from
direct sunlight and heat. Do not refrigerate.
• Store your OneTouch
original vial only; do not transfer them to a new
bottle or any other container.
• After removing a OneTouch
the vial, immediately replace the vial cap and close
it tightly.
• With clean, dry hands, you may touch the test
strip anywhere on its surface when removing it
from the vial or inserting it into the meter.
• Use each OneTouch
after removing it from the vial.
• Write the discard date on the vial label when you
open it for the first time. Discard remaining
OneTouch ® Ultra™ test strips and the vial 3 months
after the vial was first opened.
Ultra™ test strip package in a
®
Ultra™ test strips in their
®
Ultra™ test strip from
®
Ultra™ test strip immediately
®