Lifescan InDuo User Manual page 13

Match the code numbers
The calibration code is stored in the meter memory
until it is changed by the user. The current code
number will appear on the display for 3 seconds.
• Compare the code number on the meter display with the
code number on the OneTouch
• If the 2 code numbers match, you may begin testing.
• If the code numbers do not match, follow the next
procedure to recode the InDuo™ meter.
Code the InDuo™ meter
• Press Ñ to select the correct code.
• Each time you press and release Ñ, the number
on the display will increase by one.
• To scroll faster, simply hold down Ñ.
• After you have selected the correct code number, it
will flash for 3 seconds and then appear solid for 3
seconds.
• The apply symbol R will appear with the units of
measurement (Á or fi), indicating that
the InDuo™ meter is ready for testing.
GETTING YOUR InDuo™ SYSTEM READY FOR USE
Ultra™ test strip vial.
®
13
(Example)