BKI LGF Installation And Operation Manual page 27

Gas Pressure Fryer
STEP
13 Repeat steps 5-12 when
programming stages 2, 3, 4 and
5 for Electric and Gas appliance
types.
Repeat steps 5-10 when
programming stages 2, 3, 4 and
5 for an ALF appliance type.
14 Press ENTER.
15 Press TOGGLE/CLEAR and
input the prealarm minutes.
16 Press ENTER.
17 Press TOGGLE/CLEAR and
input the number of fry cycles
you want to complete before
enabling filter lockout.
18 Press ENTER.
19 If you wish to input more
programs, proceed by pressing
the next program number and
follow steps 5 through 18 or
press PROG to exit the
programming mode.
ACTION DISPLAY
PROGRAM PREALARM
00:00
PROGRAM PREALARM
XX:XX
PROGRAM FILTER
PROGRAM FILTER
PROGRAM PRODUCT #
25
COMMENTS
The time and temperature of each
stage has to be less than the
preceding stage.
This command allows you to
specify the number of minutes
before the end of the cooking time
(for each stage) until the alarm
sound The prealarm value
displayed may be a previously
programmed value.
XX:XX refers to the prealarm
minutes you input.
This command allows you to
0 specify the number of fry cycles
you want to complete for this
program before a message is
displayed reminding you to filter
the shortening (filter lockout). The
filter value displayed may be a
previously programmed value.
X refers to the number of program
X cycles you want to complete before
filtering the shortening.
Operation