Setup Mode; Enter Setup Mode; Enter Special Setup Mode; How To Leave Setup Mode - Argox F1 User Manual

Setup Mode

You can set printer parameters for your application directly by using the control
panel LCD and buttons.

Enter Setup Mode

1. Press <MENU>.
2. Use the left or right button to scroll through the parameters.

Enter Special Setup Mode

Special setup mode is the menu that lets you set up the language and change
password.
1. Press the <MENU> button for more than 5 seconds and release.
2. Use the left or right button to scroll through the parameters.

How to Leave Setup Mode

1. Press <MENU>.
The printer displays SAVE CHANGES and activates the <ENTER> button.
2. The following table shows three options for leaving the setup mode.
Option
Save Changes
Reject Changes
Return to Setup Mode
Description
Press <ENTER> to save changes and exit
setup mode.
Press the up <↑> and down < ↓> buttons to
select ―NO‖, and press <ENTER>. The printer
rejects changes and exits setup mode.

Press <MENU> to return to the same
parameter.

Press the left <←> button to return to the
previous parameter
49