Menu System
The menu system lets you set printer options using the buttons on the control
panel. The following is a description of menu selections and settings.
Basic Setup
Press <MENU> to enter Basic Setup Mode
A checkmark indicates the default option.
Note:
RIBBON
YES
NO
MEDIA TYPE
Gap/Notch
GAP LENGTH
10mm (10~99)
MARK
MARK
THICKNESS
10mm (10~99)
CONTINUOUS
TRANSMISSIVE
This parameter sets print mode for use with
direct thermal (DT) or thermal transfer (TT)
mode. Press the up <↑> and down <↓>
buttons to scroll through the selection.
This option sets as the printer to TT mode.
This option sets as the printer to DT mode.
This parameter shows the type of media you
are using. Press the up <↑> and down <↓>
buttons to scroll through the selection.
Select for non-continuous web media,
non-continuous fanfold media, and tags.
Selects the gap length of labels.
Non-continuous black mark lines.
Select black mark thickness of labels
Select for media without gaps or divisions
between labels.
Select transmissive sensor 1 or 2. Press the
up <↑> and down <↓> buttons to scroll
through the selection.
51