Argox F1 User Manual page 58

 FORM
GRAPHIC
FONT
AUTO FORM
OFF
ON
REPRINT MODE
On
Off
LABEL COUNT
On
Off
LABEL COUNT TYPE
Decreasing
Increasing
ALERT BUZZER
ON
OFF
Press <ENTER> and use the up <↑>
2.
and down <↓> buttons to scroll through
selections.
3. Press <ENTER> again and a warning
message ―Are you sure‖ appears. You
can select ―YES‖ to continue or ―NO‖ to
cancel this operation.
Delete form.
Delete graphic.
Delete font.
Auto form lets you detach the printer from a
computer and print in standalone mode.
Enable automatic form printing.
Disable automatic form printing.
Reprint a label partially printed due to ribbon
out, media out or head open error conditions.
The label is reprinted after error condition is
corrected.
Enable recovery print.
Disable recovery print.
The printer displays label quantity you print.
Enables the label count.
Disables the label count.
Count printing label quantity as decreasing or
increasing.
Count printing label as decreasing.
Count printing label as increasing.
Audible signal indicates error condition.
Enables the buzzer.
Disables the buzzer.
55