Adjust Print Head Pressure - Argox F1 User Manual

Adjust Print Head Pressure

If printing quality is not even, you may need to adjust the print head pressure.
To adjust print head pressure use a flat tip screwdriver to turn the left and right
screws counterclockwise to increase the pressure, or clockwise to decrease
the pressure. (Figure 26)
Adjust the pressure adjustment screws as follows:
Condition
Print quality of the left side of a label
is too light.
Print quality of the right side of a
label is too light.
Figure 26
Resolution
Turn the left screw counterclockwise to
increase the pressure.
Turn the right screw counterclockwise
to increase pressure.
48
Left Screw
Right Screw