Clean Up; Assembly - Grizzly G0632 Owner's Manual

Clean Up

Clean Up
The unpainted surfaces are coated with a waxy
oil to prevent corrosion during shipment. Remove
this protective coating with a solvent cleaner or
citrus-based degreaser such as Grizzly's G7895
Citrus Degreaser. To clean thoroughly, some parts
must be removed. For optimum performance
from your machine, clean all moving parts or
sliding contact surfaces. Avoid chlorine-based
solvents, such as acetone or brake parts cleaner
that may damage painted surfaces. Always follow
the manufacturer's instructions when using any
type of cleaning product.
Gasoline and petroleum
products have low flash
points and can explode or
cause fire if used to clean
machinery. DO NOT use
these products to clean
the machinery.
Many cleaning solvents are
toxic if inhaled. Minimize
your risk by only using
these products in a well
ventilated area.
G7895—Grizzly Citrus Degreaser
This natural, citrus-based degreaser is a great
solution for removing export grease, and it's much
safer to work around than nasty solvents.
Figure 10. Grizzly citrus degreaser.
-16-

Assembly

To assemble your lathe:
1. Stand the right and left supporting legs up
approximately 47" apart, and get them rea-
sonably aligned, as shown in Figure 11.
Figure 11. Stand legs approximately 47" apart to
prepare for mounting the lathe.
The G0632 and its com-
ponents are very heavy.
Get lifting help or use
power lifting equipment
such as a fork lift to move
heavy items.
2.
Using the help of assistants, carefully lift the
lathe onto the stands and align the mounting
holes.
Note: The headstock end of the lathe is the
heaviest and usually requires two people for
lifting that end.
G0632 16" x 42" Variable Speed Wood Lathe