Indexing - Grizzly G0632 Owner's Manual

16" x 42" variable speed wood lathe

Hide thumbs Also See for G0632:

Table of Contents

Indexing

Indexing on a lathe is typically used for workpiece

layout and other auxiliary operations that require

equal distances around the workpiece circumfer-

ence, such as clock faces or inlays.

By inserting the indexing pin into one of the three

outer indexes of the Model G0632 spindle hous-

ing and engaging one of the eight inner indexes

in the spindle, the workpiece can be positioned to

one of 24 equal points (see Figure 33).

��

�

��

Figure 33. Model G0632 indexing configuration.

G0632 16" x 42" Variable Speed Wood Lathe

To use the indexing feature, place the indexing pin

into one of the indexing holes in the headstock as

shown in Figure 34. This will hold the spindle and

workpiece at the desired indexed position.

�

��

Figure 34. Indexing pin and indexing holes.

Always disconnect the lathe from power

before using the indexing feature of this

lathe. Do NOT start the lathe with the index-

ing pin inserted into the spindle; otherwise

��

property damage and personal injury could

result.

-27-

Table of Contents