Installing Kuhler H O Liquid Coolers; Power Supply Installation - Antec Three Hundred Two User Manual

2.4 Installing KUHLER H
The following instructs how to install the Antec KUHLER H
CPU coolers, please consult your manufacturer's installation guide.
Caution:
Check your motherboard's CPU socket to ensure its compatibility with the KUHLER H
H O 620 / 920 is compatible with the following CPU sockets:
2
Intel® LGA 1155 / 1156 / 1366 / 2011*
AMD® AM2 / AM3 / AM2+ / AM3+
*Your unit may not contain the LGA 2011 mounting bracket. To receive this bracket, please contact
Antec customer support (information is listed at end of manual).
**Be sure to install the KUHLER H
1. Remove the rear fan by unscrewing the fan from the back of the chassis.
2. Preparing the KUHLER H
H O installation guide, available at
2
http://www.antec.com/Believe_it/product.php?id=Mjc2OCYxNw== (KUHLER H
http://www.antec.com/Believe_it/product.php?id=NzA0MzcwJjE3 (KUHLER H
information.
3. Prepare the retention ring according to the CPU socket you're using.
4. Complete installation according to the KUHLER H
2.5

Power Supply Installation

1. With the case upright, place the power supply in the case and align the rear of the unit with the
mounting holes.
2. Attach the power supply to the case with the screws provided (A in Section 1.3).
10
O Liquid Coolers
2
O with the end of the tubes positioned at the bottom of the radiator.
2
O backplate is specific to your CPU socket. Please refer to the KUHLER
2
Attach the power supply with the provided screws.
O liquid CPU cooler (620 / 920). For any other
2
O instructions.
2
O. The KUHLER
2
O 620) or
2
O 920) for more
2