Eaton Powerware 5125 User Manual page 2

This product is covered by one or more of the following US Patent numbers: 5177676, 6314007, 6330176,
6391489, 6483730, and 6599657.
Units that are labeled with a CE mark comply with the following harmonized standards and EU directives:
S
Harmonized Standards: IEC 62040-1-1 and IEC 62040-2; IEC 60950 Third Edition
S
EU Directives:
The EC Declaration of Conformity is available upon request for products with a CE mark. For copies of the EC
Declaration of Conformity, contact:
Eaton Power Quality Oy
Koskelontie 13
FIN-02920 Espoo
Finland
Phone: +358-9-452 661
Fax: +358-9-452 665 68
Eaton, Powerware, ABM, FERRUPS, LanSafe, and X-Slot are registered trademarks and ConnectUPS is a trademark
of Eaton Corporation or its subsidiaries and affiliates. Modbus is a registered trademark of Schneider Automation.
Microsoft is a registered trademark of Microsoft Corporation in the United States and other countries. National
Electrical Code and NEC are registered trademarks of National Fire Protection Association, Inc. All other trademarks
are property of their respective companies..
ECopyright 2004–2010 Eaton Corporation, Raleigh, NC, USA. All rights reserved. No part of this document may be
reproduced in any way without the express written approval of Eaton Corporation.
Requesting a Declaration of Conformity
73/23/EEC, Council Directive on equipment designed for use within certain voltage limits
93/68/EEC, Amending Directive 73/23/EEC
89/336/EEC, Council Directive relating to electromagnetic compatibility
92/31/EEC, Amending Directive 89/336/EEC relating to EMC