Replacing The License Plate Light Bulb - Yamaha FZ6RB(C) Owner's Manual

U36P13E0.book Page 39 Tuesday, July 5, 2011 8:45 AM
1
1. Turn signal light bulb socket
3. Remove the burnt-out bulb by pull-
ing it out.
1
1. Turn signal light bulb
4. Insert a new bulb into the socket.
5. Install the socket (together with the
bulb) by turning it clockwise.
6. Install the turn signal light unit by
installing the screw.
PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the screws.
1
1. License plate light unit
2. Screw
2. Remove the license plate light bulb
socket (together with the bulb) by
pulling it out.
7-39
EAU24313
1. License plate light bulb socket
2. License plate light bulb
2
3. Remove the burnt-out bulb by pull-
ing it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with the
bulb) by pushing it in.
6. Install the license plate light unit by
installing the screws.
1
2
7