Yamaha FZ6RB(C) Owner's Manual page 34

U36P13E0.book Page 14 Tuesday, July 5, 2011 8:45 AM
INSTRUMENT AND CONTROL FUNCTIONS
To install the passenger seat
1. Insert the projection on the rear of
the passenger seat into the seat
holder as shown, and then push
the front of the seat down to lock it
in place.
4
1. Projection
2. Seat holder
2. Remove the key.
Rider seat
To remove the rider seat
1. Remove the passenger seat.
2. Remove the bolts, and then pull
the rider seat off.
1
1
1. Rider seat
2
2. Bolt
To install the rider seat
1. Insert the projection on the front of
the rider seat into the seat holder
as shown, place the seat in the
original position, and then tighten
the bolts.
4-14
1
2
1. Seat holder
2. Projection
2. Install the passenger seat.
TIP
● Make sure that the seats are prop-
erly secured before riding.
● The rider seat height can be ad-
justed to change the riding posi-
tion. (See the "Adjusting the rider
seat height" section.)
2