Yamaha FZ6RB(C) Owner's Manual page 27

U36P13E0.book Page 7 Tuesday, July 5, 2011 8:45 AM
mode "F-TRIP" and start counting the
distance traveled from that point. In that
case, push the "SELECT" button to
switch the display between the various
tripmeter and odometer modes in the
following order:
F-TRIP → TRIP A → TRIP B → ODO
→ F-TRIP
To reset a tripmeter, select it by push-
ing the "SELECT" button, and then
push the "RESET" button for at least
one second. If you do not reset the fuel
reserve tripmeter manually, it will reset
itself automatically and the display will
return to the prior mode after refueling
and traveling 5 km (3 mi).
Fuel meter
1
1. Fuel meter
INSTRUMENT AND CONTROL FUNCTIONS
The fuel meter indicates the amount of
fuel in the fuel tank. The display seg-
ments of the fuel meter disappear to-
wards "E" (Empty) as the fuel level
decreases. When the last segment on
the left starts flashing, refuel as soon as
possible.
TIP
This fuel meter is equipped with a self-
diagnosis system. If a problem is de-
tected in the electrical circuit, the follow-
ing cycle is repeated until
malfunction is corrected: fuel level seg-
ments and symbol " " flash eight
times, then go off for approximately 3
seconds. If this occurs, have a Yamaha
dealer check the electrical circuit.
4-7
Coolant temperature display
1
1. Coolant temperature display
the
The coolant temperature display indi-
cates the temperature of the coolant.
NOTICE
Do not continue to operate the en-
gine if it is overheating.
4
ECA10021