Dismantling The Cutting Unit - Husqvarna Rider ProFlex 18 Operator's Manual

Dismantling the cutting unit

WARNING!
Take care. Risk of crushing injury
1. Place the Rider on a level surface.
2. Apply the brakes by pressing down the pedal
and lock using the pushbutton.
3. Lift up the unit using the lifting lever.
4. Remove the nose.
5. Remove the belt adjuster's spring.
6. Take the belt off the front pulley.
7. Hook on the belt adjuster's spring again.
8. Hang the belt around the handle.
MAINTENANCE
35
English –