Stopping The Engine; Disengage Lever - Husqvarna Rider ProFlex 18 Operator's Manual

Stopping the engine

Preferably allow the engine to idle for a minute to
obtain normal working temperature before stopping
it if it has been working hard.
1. Lift up the cutting unit by pulling the lever back
to the locked position.
2. Move the throttle control to the MIN. position.
Turn the ignition key to the STOP.
3. When the Rider is at a standstill, press
down the parking brake and push in the
locking button.

Disengage lever

The release control must be pulled out in order for
the Rider to be moved when the engine is shutoff.
DRIVING
17
English –