Cutting Tips - Husqvarna Rider ProFlex 18 Operator's Manual

Cutting tips

WARNING!
Clear the lawn from stones and
other objects which can be
thrown out by the blades.
• Localise and mark stones and other fixed
objects to avoid collision.
• Start with a high cutting height and reduce down
until the required mowing results are obtained.
• The mowing results are best with a high engine
speed (fast rotating blades) and low driving
speed (slow moving machine). If the grass is not
too high and thick the driving speed can be
increased or the engine speed reduced without
noticeably affecting the mowing results.
• The best lawns are achieved if the grass is cut
often. Mowing becomes more uniform and the
grass cuttings become more evenly distributed
over the surface.
The total time consumption is not greater since
it is possible to select a higher driving speed
without inferior mowing results.
• Avoid mowing a wet lawn. The mowing results
are inferior since the wheels sink down into the
soft lawn.
• Hose down the cutting unit with water
underneath each time it is used. The cutting unit
should be raised into the service position when
cleaning.
• If you use the BioClip unit it is important to mow
the grass regularly.
WARNING!
Never drive the machine on
ground at an angle of more than
15 . Mow slopes upwards and
downwards, never across. Avoid
sudden changes in direction.
16
– English
DRIVING
Mowing pattern
MAX 15