Dismantling The Cutting Unit - Husqvarna ProFlex 18 ProFlex, 20 ProFlex Operator's Manual

Dismantling the cutting unit

1. Place the Rider on a level surface.
2. Apply the brakes by pressing down the pedal
and lock using the pushbutton.
3. Lift up the unit using the lifting lever.
4. Remove the nose.
5. Remove the belt adjuster's spring.
6. Lift off the belt from the belt pulley.
7. Hook on the belt adjuster's spring again.
8. Hang the belt around the handle.
MAINTENANCE
29
English –