Samsung SCD-2080R User Manual page 28

setup

When the CAM TITLE menu is 'OFF', no title will be displayed on the monitor screen even if you
enter one.

Only English is available in the mode.

If you move the cursor to CLR and press the Function Setup switch, all the letters are deleted.
To edit a letter, change the cursor to the bottom left arrow and press the Function Setup switch.
Move the cursor over the letter to be edited, move the cursor to the letter to be inserted and then
press the Function Setup switch.
MOTION DET :
This product has a feature that allows you to observe movement of objects in 8
different areas on the screen, and the words 'MOTION DETECTED' appear on
the screen when movement is detected. You can monitor activity more effi cient.
When the SPECIAL menu screen is
displayed, press the Function Setup
switch so that the arrow indicates
'MOTION DET'.
Set up the mode using the Function
Setup switch.
- SENSITIVITY :
You can select up to 8 MD areas.
When SENSITIVITY number is high, motion detection sensitivity is
increased to recognize even small movement.
- AREA MODE : Determines whether to use the MD area selected in SENSITIVITY.
- SEL POS : Determines which of the 4 vertices of each MD area is to be used.
- XPOS : Determines the coordinate of the horizontal axis for SEL POS.
- YPOS : Determines the coordinate of the vertical axis for SEL POS.
- FILL SET : Fills in a selected MD area. The color of fi lling is sequentially
- RETURN : Select this to save the MOTION DET menu settings and return

MD areas show only MOTION DET menu. Therefore, MD areas are only displayed while setting the
MD menu.
28_ setup
selected as brown, orange, blue, cyan, yellowish green, yellow,
magenta and red.
to the SPECIAL menu.
MOTION DET
1.SENSITIVITY AREA1
2.AREA MODE
3.SEL POS L-TOP
4.XPOS
5.YPOS
6.FILL SET
7.RETURN
ON
3
5