Connection; Connecting To Monitor; Connecting To Power - Samsung SCD-2080R User Manual

connection

CONNECTING TO MONITOR

Connect the VIDEO-OUT jack to the VIDEO-IN jack of monitor.
As the connecting method varies with the instruments, refer to the manual supplied
with the instrument.
Only connect the cable when the power is turned off.

CONNECTING TO POWER

Connect the adaptor to the power input connector as shown in the fi gure below.
The recommended adaptor specifi cation for SCD-2080RN/SCD-2080RP is DC 12V / 500mA.
When the resistance value of copper wire is at [20°C(68°F)]
Copper wire size
(AWG)
Resistance ( /m)
Voltage Drop (V/m)
As shown in the table above, voltage decreases as the wire gets longer. Therefore,
the use of an excessively long power cable to the camera may affect the camera's
performance.
16_ connection
CCTV Camera
---- Power Input Terminal
#24 #22
(0.22mm2) (0.33mm2)
0.078 0.050
0.028 0.018
Monitor
#20 #18
(0.52mm2) (0.83mm2)
0.030 0.018
0.011 0.006
*
*
U