Samsung SCD-2080R User Manual page 25

el
COLOR : The picture is always displayed in color.
B/W : The picture is always displayed in black and white.
You can turn on or off the burst signal on B/W mode.
- IR LED Mode : On: 12EA, Off: 6EA
- IR Mode : When IR LED is turned on
in B/W, the objects can be
clearly identifi ed due to the
function that decreases screen
saturation of objects within a
short distance.
AUTO : The mode is switched to 'Color'
in a normal environment, but
switches to 'B/W' mode when
ambient illumination is low.
To set up the switching time for
AUTO mode, press the Function
Setup switch.
- BURST MODE : You can turn on or
off the burst signal on B/W mode.
- DWELL TIME : You can select the duration time about changing the day/
night mode.
3s, 5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s
- DURATION : You can select the brightness level at which the camera
switches from day to night mode.
Fast
Slow
Light levels are often site dependant.

When AGC in the EXPOSURE menu is 'OFF', '---' mode operates as selecting 'COLOR' mode
and 'AUTO' mode cannot be selected.

The OSD key does not work for 3 seconds when switching to Color or B/W, to ensure stable
camera operation.

BLC function does not work in B/W mode.
TOP
BOTTOM
LEFT
RIGHT
▶ 1.BURST MODE
2.COLOR→B/W
DURATION
DWELL TIME
3.B/W→COLOR
DURATION
DWELL TIME
4.RETURN
Color B/W
2.5 lux
1 lux
IR MODE SETUP
50
110
52
118
AUTO SETUP
ON
FAST
3 SEC
FAST
10 SEC
B/W Color
5 lux
10 lux
English_25