Installation - Samsung SCD-2080R User Manual

installation

INSTALLATION
1. Separate the dome cover by turning anti-clockwis.
2. Separate the shield case by pulling from the camera body.
Locking direction
[Figure1]
Unlocking direction
(Anti-clockwise)
To install the dome cover on the camera body, turn the latches in the locking direction as
shown in the figure 1.

The installation should be done by qualifi ed
service personnel or system installers.

If the ceiling material is not strong enough to
hold the installation screws, the camera may
fall off. Reinforce the ceiling as needed.

To change the position of the cable, take
away the Hole Cover and pass the cable
through.
12_ installation
Latch
Main Body
(Camera)
Locking direction
(Clockwise)
Dome cover
Original position of
the cable
Hole Cover