Samsung SCD-2082 Quick Manual

ENGLISH
High Resolution Varifocal
Dome Camera
Quick Manual
SCD-2082
❶ Pan Base : Control panning angle of camera.
❷
Rotate Base : Control rotating angle of camera.
❸ Tilt Base : Control tilting angle of camera.
➍
x3.6 Vari-focal Lens Module : 2.8 ~ 10.0mm (F1.2).
➎
Video Output Terminal to Monitor
➏
Function Setup switch : Display the menu on the screen and move the cursor to four directions to
➐
Video Output Jack : Video signals are output through this port. Connect this port to the Video IN
➑
Power input terminal : Connect the power as specified for each model here.
➒
Dome Cover
❿
Shield Case
1.LENS
2.EXPOSURE
3.DEFOG
4.WHITE BAL
5.BACKLIGHT
6.SSNR3
7.DAY/NIGHT
8.SPECIAL
9.EXIT
DEUTSCH
❶
Supporto Pan : Für die Steuerung des Schwenkwinkels der Kamera.
❷
Drehbasis : Für die Steuerung des Drehwinkels der Kamera
❸ Neigebasis : Für die Steuerung des Neigewinkels der Kamera
➍
x3.6 Objektiv mit variabler Brennweite : 2.8 ~ 10.0mm (F1.2).
➎
Videoausgang für Anschluss von Monitor
➏
Funktion-Setup-Schalter : Anzeigen des Bildschirmmenüs und Bewegen des Cursors in vier
➐
Video-Out-Anschlussbuchse : Über diesen Port werden Videosignale ausgegeben. Diesen Port mit
➑
Netzeingang : Schließen Sie die für das jeweilige Modell angegebene Stromversorgung hier an.
➒
Domekuppel
❿
Abschirmkappe
EINST HAUPTMENÜ
1.LENS
SALES NETWORK
2.BELICHTUNG
• SAMSUNG TECHWIN CO., LTD.
3.ENTNEBELN
Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400
TEL: +82-70-7147-8740~60, FAX: +82-31-8018-3745
4.WEIβAB
• SAMSUNG TECHWIN AMERICA Inc. • SAMSUNG TECHWIN EUROPE LTD.
5.GEGENLICHT
100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Samsung House, 1000 Hillswood Drive, Hillswood Business Park
Chertsey, Surrey, UNITED KINGDOM KT16 OPS
Toll Free : +1-877-213-1222 Direct : +1-201-325-6920
6.SSNR3
Fax : +1-201-373-0124 TEL : +44-1932-45-5300 FAX : +44-1932-45-5325
www.samsungcctvusa.com 7.TAG/NACHT
8.SPEZIAL
PT01-001641A
www.samsungtechwin.com
www.samsungsecurity.com 9.BEENDEN
Safety Information
SCD-2082 Quick Manual
➊ ➋ ➍
➒ ❿ ➎
: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK)
CAUTION
NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This symbol indicates that dangerous voltage consisting a risk of electric shock is
present within this unit.
➏
3
This exclamation point symbol is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
➐
➑
WARNING
• To prevent damage which may result in fire or electric shock hazard, do not expose this
appliance to rain or moisture.
• To prevent injury, this apparatus must be securely attached to the floor/wall in
accordance with the installation instructions.
confirm status or after changing a selected item.
WARNING
port of a monitor.
1. Be sure to use only the standard adapter that is specified in the specification sheet.
Using any other adapter could cause fire, electrical shock, or damage to the product.
2. Incorrectly connecting the power supply or replacing battery may cause explosion, fire,
electric shock, or damage to the product.
MAIN SETUP
3. Do not connect multiple cameras to a single adapter. Exceeding the capacity may
DC DC
cause abnormal heat generation or fire.
BRIGHTNESS / SHUTTER / AGC / SENS-UP / RETURN
OFF 4. Securely plug the power cord into the power receptacle. insecure connection may
OFF / AUTO / MANUAL
cause fire.
ATW
ATW / OUTDOOR / INDOOR / MANUAL / AWC SET
5. When installing the camera, fasten it securely and firmly. The fall of camera may cause
OFF / USER BLC / HLC
OFF
personal injury.
ON
ON / OFF
6. Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or
AUTO
AUTO / COLOR / B/W
containers filled with water on top of the camera. doing so may cause personal injury
IMAGE ADJ / CAM TITLE / PRIVACY / MOTION DET / due to fire, electric shock, or falling objects.
SYNC / COAX / SSDR / RETURN
SAVE
SAVE / NOT SAVE / RESET
ESPAÑOL
SCD-2082 Kurzanleitung SCD-2082 Manual Rápido
➒ ❿ ➊ ➎ ➋ ➍ ➒
➏
3
➐ ➐
➑ ➑
❶
Base de Paneo : Controla el ángulo de paneo de la cámara.
❷ Base de rotación : Commande de l'angle de rotation de la caméra.
❸ Base de Inclinación : Control del ángulo de inclinación de la cámara
➍
Módulo del Lente Varifocal x3,6 : 2.8 ~ 10.0mm (F1.2).
➎
Terminal de Salida de Video al Monitor
➏
Botón de Configuración de Funciones : Muestra el menú en la pantalla y desplaza el cursor en las
Richtungen zur Statusbestä oder nach Änderung eines Elements.
cuatro direcciones para confirma estado o el cambio de un elemento seleccionado.
➐
Puerto de Salida de Video : Permite la salida de las señales de video. Conecte este puerto al puerto
dem Port "Video IN" an einem Monitor verbinden.
de entrada de un monitor.
➑
Terminal de entrada de alimentación : Conecte aquí la alimentación apropiada para cada modelo.
➒
Cubierta del Domo
❿
Tapa Protectora
CONFIG PRINCIPAL
DC DC
1.LENTE
2.EXPOSIC
HELLIGKEIT / SHUTTER / AGC / SENS-UP / ZURÜCK
AUS
3.ANTINIEBLA
AUS / AUTO / MANUELL
ATW
4.BAL BLAN
ATW / AUßEN / INNEN / MANUELL / AWC SET
AUS AUS / BEN BLC / HLC 5.CONTRALUZ
EIN 6.SSNR3
EIN / AUS
AUTO
AUTO / COLOR / S/W 7.DIA/NOCHE
BILDEINST / TITEL KAM / PRIVAT / BEW ERKENNG / 8.ESPEC
SYNC / COAX / SSDR / ZURÜCK
SAVE
9.SALIR
SAVE / NOT SAVE / RÜCK S
7. Do not install the unit in humid, dusty, or sooty locations. doing so may cause fire or
electric shock.
CAUTION
8. If any unusual smells or smoke come from the unit, stop using the product. in such
RISK OF ELECTRIC SHOCK.
case, immediately disconnect the power source and contact the service center.
DO NOT OPEN
continued use in such a condition may cause fire or electric shock.
9. If this product fails to operate normally, contact the nearest service center. never
disassemble or modify this product in any way. (samsung is not liable for problems
caused by unauthorized modifications or attempted repair.)
10. When cleaning, do not spray water directly onto parts of the product. doing so may
cause fire or electric shock.
CAUTION
1. Do not drop objects on the product or apply strong shock to it. Keep away from a
location subject to excessive vibrationor magnetic interference.
2. Do not install in a location subject to high temperature, low temperature, or high
humidity. Doing so may cause fire or electric shock.
3. If you want to relocate the already installed product, be sure to turn off the power and
then move or reinstall it.
Remove the power plug from the outlet when then there is a lightning. Neglecting to
4.
do so may cause fire or damage to the product.
5. Keep out of direct sunlight and heat radiation sources. It may cause fire.
6. Install it in a place with good ventilation.
7. Avoid aiming the camera directly towards extremely bright objects such as sun, as this
may damage the CCD image sensor.
8. Apparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the apparatus.
9. The Mains plug is used as a disconnect device and shall stay readily operable at any
time.
10. Do not expose the camera to radioactivity. Radioactivity exposure may damage the
CCD.
FRANÇAIS
SCD-2082 manuel de référence rapide
❿ ➊ ➎ ➋ ➍ ➒ ❿ ➊ ➎
➏ ➏
3
➐
➑
❶ Base panoramique : Commande de l'angle panoramique de la caméra.
Base de rotation : Permet de commander l'angle de rotation de la caméra.
❷
❸ Base d'inclinaison : Commande l'angle d'inclinaison de la caméra
➍ Module de lentille avec zoom x3.6 : 2.8 ~ 10.0mm (F1.2).
Terminal de sortie vidéo vers le moniteur
➎
➏ Commutateur de configuration des fonctions : Affiche le menu sur l'écran et déplace le curseur
dans les quatre directions, pour confirmer, ou après une modification d'un élément sélectionné.
➐ Prise de sortie vidéo : Les signaux vidéo sont émis via ce port. Raccordez ce port au port d'entrée
(IN) d'un moniteur.
Terminal d'entrée d'alimentation : Raccordez l'alimentation selon la manière spécifiée ici pour
➑
chaque modèle.
Couvercle du dôme
➒
❿ Boîtier de protection
CONFIG PRINCIPALE
1.LENS DC
DC DC
2.EXPOSITION
BRILLO / SHUTTER / AGC / SENS-UP / VOLVER
3. DÉSEMBUER ARRET
OFF
OFF / AUTO / MANUAL
4.BAL BLC ATW
ATW
ATW / EXTER / INTER / MANUAL / AWC SET
OFF OFF / USER BLC / HLC 5.CONTRE-JOUR ARRET
6.SSNR3 MARCHE
ON
ON / OFF
7.JOUR/NUIT AUTO
AUTO
AUTO / COLOR / N/B
8.SPECIAL
AJUST IMAG / TITULO CAM / PRIVACIDAD / DET MOV /
SYNC / COAX / SSDR / VOLVER 9.QUITTER SAVE
SAVE
SAVE / NOT SAVE / RESET
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8. Do not install near any heat sources such as radiators, heat registers, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong is provided for
your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus.
13. Unplug this apparatus when a card is used. Use caution when
moving the cart/ apparatus combination to avoid injury from tip-over.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as powersupply cord or
plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
Apparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the apparatus
ITALIANO
SCD-2082 Guida rapida
➋ ➍ ➒ ❿ ➊ ➎ ➋
➏
3 3
➐
➑
❶
Supporto Pan : Controllo angolo di rotazione orizzontale (pan) della videocamera.
❷
Supporto girevole : Controllo angolo di rotazione della videocamera.
❸
Tilt Base : Controlla l'angolo di tilt della telecamera
➍
Sistema varifocale x3.6 : 2.8 ~ 10.0mm(F1.2).
➎
Terminale uscita video al Monitor
➏
Pulsante Impostazione funzioni : Visualizza il menù e permette di scorrere il cursore in quattro
direzioni per confermare o modi la voce selezionata.
➐
Jack Video in uscita : Porta in uscita per il segnale video. Collegare la porta alla porta video in entrata
di un monitor.
➑
Terminale alimentazione : Collegare l'alimentazione secondo le indicazioni del modello utilizzato.
➒
Custodia a cupola
❿
Custodia di protezione
CONFIG PRINCIPALE
1.OTTICA DC DC
DC
2.ESPOSIZIONE
LUMINOSITÀ / OTTURATORE / AGC / SENS-UP / RITORNO
LUMINOSITE / OBTURATEUR / AGC / SENS-UP / RETOUR
3. SCHIARIMENTO OFF
OFF / AUTO / MANUALE
ARRET / AUTO / MANUEL
4.BIL BIANCO ATW
ATW / ESTERNO / INTERNO /MANUALE/ AWC SET
ATW / EXTER / INTER /MANUEL/ AWC SET
5.CONTROLUCE OFF OFF / USER BLC / HLC
ARRET / USER BLC / HLC
6.SSNR3 ON
ON / OFF
MARCHE / ARRET
7.GIORNO/NOTT AUTO
AUTO / COLORE / B/N
AUTO / COULEUR / N/B
8.SPECIALE
REG IMMAGINE / TITOLO CAM / PRIVACY / MOTION
REG IMAGES / TITRE CAM / MASQUAGE / DET
DET / SYNC / COAX / SSDR / RITORNO
9.USCITA SAVE
MOUVE / SYNC / COAX / SSDR / RETOUR
SAVE / NOT SAVE / RESET
SAVE / NOT SAVE / REINIT
Samsung Techwin cares for the environment at all product manufacturing
stages to preserve the environment, and is taking a number of steps to
provide customers with more environment-friendly products.The Eco
mark represents Samsung Techwin's will to create environment-friendly
products, and indicates that the product satisfies the EU RoHS Directive.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the
product and its electronic accessories (e.g. charger, headset, USB cable)
should not be disposed of with other household waste at the end of their
working life. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, please separate these items from other
types of waste and recycle them responsibly to promote the sustainable
reuse of material resources.
Household users should contact either the retailer where they purchased this product, or
their local government office, for details of where and how they can take these items for
environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the
purchase contract.
This product and its electronic accessories should not be mixed with other commercial
wastes for disposal.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries
in this product should not be disposed of with other household waste at the
end of their working life. Where marked, the chemical symbols Hg, Cd or
Pb indicate that the battery contains mercury, cadmium or lead above the
reference levels in EC Directive 2006/66. If batteries are not properly disposed
of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries
from other types of waste and recycle them through your local, free battery return
system.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions :
This device may not cause harmful interference, and
This device must accept any interference received including interference that may cause
undesired operation.
ČESKY
SCD-2082 Rychly návod
➍ ➒ ❿ ➊ ➎ ➋ ➍
➏
3
➐
➑
❶
Základna otočení : Kontroluje úhel otočení kamery.
❷ Základna rotace : Kontroluje rotační úhel kamery.
❸ Základna naklonění : Kontroluje naklonění úhlu kamery
➍
x3,6 varifokální čočka : 2.8 ~ 10.0mm(F1.2).
➎
Výstup obrazu do monitoru
➏
Tlačítko nastavení funkce : Na obrazovce zobrazí nabídku a přesune kurzor do čtyř směrů k
potvrzení či po změně vybrané položky.
➐
Připojení výstupu obrazu : Skrze tento výstup vychází signál obrazu. Tento výstup připojte ke VSTUPU
obrazu monitoru.
➑
Terminál vstupu napájení : Připojte napájení, jak je to uvedeno pro každý model.
➒
Kryt kopule
❿
Kryt
HLAVNÍ NASTAVENÍ
1.OBJEKTIV DC DC
2.EXPOZICE JAS / CLONA / AGC / SENS-UP / RETURN
3.ODMLZIT VYP
VYP / AUTO / RUČNÍ
4.VYVÁŽENÍ BÍLÉ ATW
ATW / VENKU / UVNITŘ / RUČNÍ / AWC SET
VYP / USER BLC / HLC
5.PODSVÍCENÍ VYP
6.SSNR3 ZAP
ZAP / VYP
7.DEN/NOC AUTO
AUTO / BARVA / ČB
8.SPECIÁL
ÚPR AVA SNÍMKU / NÁZEV KAMERY / SOUKROMÍ / MOTION
DET / SYNC / COAX / SSDR / RETURN
9.VÝSTUP ULOŽIT
ULOŽIT / NEUKLÁDAT / RESETOVAT