Samsung SCD-2080R User Manual page 23

or
n
d
e
BLC : Enables a user to directly select a desired area from a picture, and to view
the area more clearly.
- LEVEL : Adjust level of the BLC function.
- TOP/BOTTOM/LEFT/RIGHT :
Adjust the area to be enhanced.
HLC (High Light Compensation) :
This function masks the strong light to minimize white out due to over exposure and
preserve much of the on-screen details when the camera aims a strong light source.
- LEVEL : Adjust level of the HLC function.
- LIMIT : Enable to change the operating condition.
- MASK COLOR/TONE :
Change the color / brightness of the masking area. (Black, Red, Blue, Cyan, Magenta)
- TOP/BOTTOM/LEFT/RIGHT :
Adjust the area to be enhanced.
OFF : Not being used
3. Select a desired mode using the Function Setup switch and press the switch.
Select 'BLC' to adjust the area to be
enhanced then adjust the level.
BLC SETUP
LEVEL
TOP
BOTTOM
LEFT
RIGHT
Press SET to Return

Because there can be a difference in the effectiveness of HLC according to the amount of light
area in the screen, optimize the installation angle for the best HLC performance.

In a dark environment, the HLC is only activated when a high light that is larger than a certain area
is present.

The HLC is not activated in overly bright or dark condition. (In NIGHT ONLY mode.)

When HLC Function is used, D-ZOOM and DIS function are not activated.

BLC function does not work in B/W mode.
HLC : Enable the user to change the level,
limit, mask color/tone and area.
MIDDLE LEVEL
38 LIMIT
MASK COLOR
109
MASK TONE
54
TOP
121
BOTTOM
LEFT
RIGHT
Press SET to Return
HLC SETUP
MIDDLE
NIGHT ONLY
BLACK
1
5
120
5
172
English_23