Samsung SCD-2080R User Manual page 20

setup
2. Select a desired mode using the Function
Setup switch.
BRIGHTNESS : Adjusts the video brightness.
SHUTTER : You can select either auto or
manual shutter.
- A.FLK : Select this when you experience
picture fl icker, which can happen
when there is a clash with the frequency of the installed lighting.
- ESC : Select this to control the shutter speed automatically. If ESC is
selected, the shutter speed is automatically controlled depending on
the ambient illumination of the subject.
- MANUAL : You can control shutter speed manually.
- --- : Shutter speed is fi xed at 1/60sec(1/50sec).

Set the shutter mode to --- if color rolling occurs.

When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.
AGC (AUTO GAIN CONTROL) :
The higher the gain level, the brighter the
screen but the higher the noise.
- OFF : Deactivates the AGC function.
- LOW : Allows automatic gain control
from 5.3dB to 32dB.
- HIGH : Allows automatic gain control from 5.3dB to 37dB.
SENS-UP : When it is night or dark, the camera automatically detects the light level
and maintains a clear picture if this mode is activated.
- OFF : Deactivates the SENS-UP function.
- AUTO : Activates the SENS-UP function.

If you press the Function Setup switch in 'AUTO' mode, You can adjust brightness by adjusting
the SENS-UP level. (x2 ~ x512)

Note that the higher the SENS-UP level, the brighter the screen, but the more likely it is that an
after-image will appear.

Although Noise, Spots, and Whitish symptoms may occur in SENS-UP operation when the
sens-up level is increased, this is normal.

If GAIN of EXPOSURE is not in use, the SENS-UP is set to "---".
20_ setup
(NTSC MODEL : 1/60~1/120,000, PAL MODEL : 1/50~1/120,000)
EXPOSURE SETUP
1.BRIGHTNESS
2.SHUTTER
3.AGC HIGH
4.SENS-UP OFF
5.RETURN
LIMIT
AUTO
Press SET to Return
25
---
x2