Making the Power and Compressed-Air
Connections
Please note that the instructions in this section apply only to a compressed-air model of
APEX Rx. The last step is to connect the main power cord to the APEX and connect
the APEX to your facility's compressed-air supply.
Connecting the Main Power Cord
To attach the main power cord to the APEX, do the following.
1) Unscrew the 8 mounting bolts on the face of the APEX's control panel, and remove
the face plate.
2) Feed the main power cord through the hole in the frame and through the black
plastic grommet in the base of the control panel, as shown below.
Page 14
Thermo Scientific—APEX 500 Rx User's Guide