Error Messages - ALLEN & HEATH GL4800 User Manual

Hard Reset
EDIT
GROUP
PREVIEW

Error Messages

GL4800
User Guide
Should the console memory become corrupted it can be reset
to the factory defaults by performing a hard reset :
Hold down EDIT GROUP + PREVIEW GROUP while powering
up the console. The following condition set :
All console mutes turned on.
Snapshot display shows
All mute snapshots cleared (mutes turned off).
All mute groups cleared (mutes turned off).
MIDI channel set to 16.
No mute safes set.
No solo safes set.
In the event of an automation error an error message is
displayed. This is a two part message comprising an error
number and an error code. For example, should a MIDI Dump
In error be detected the following error number will be
displayed :
Er0
Press any automation key to show the error code which gives
further information about the error.
Ec1
Press any automation key to clear the error display and return
the system to normal operation.
The following ERROR MESSAGES apply :
NUMBER CODE DESCRIPTION
0 MIDI Dump In error
0
1
2
3
4
1 EEPROM memory access error
0
1
2
3
4
2 Power brown-out detected
0
Packet 0 not received
Missing packet
Buffer overflow
Checksum error
Dump timeout
Write error
Page write error
Read error
Page read error
Byte read error
47