Solo Safes - ALLEN & HEATH GL4800 User Manual

Professional dj mixer
Hide thumbs Also See for GL4800:
Table of Contents

Advertisement

Solo Safes

Solo-In-Place can mute all the console mutes including channels, aux sends, groups
and main outputs. To hear the effect of soloed channels the required outputs should
not be muted. You may also wish to always hear the effect of signal processing
devices such as reverbs connected to the console aux sends and returns. Here, the
aux sends and channels allocated as effects returns should not mute when solo is
activated.
The GL4800 includes a 'solo safe' facility so that selected mutes can be disabled
from the solo system. This works in the same way as the 'mute safes' described
earlier but affects solo and not the mute groups or snapshots. Any mutes made
'safe' can be previewed and edited before Solo-In-Place is activated and without
affecting the console mute status. Solo safe settings are retained on power off and
can be archived via MIDI.
Make a Channel 'Solo Safe'
To Disable or Enable Solo-In-Place
GL4800
User Guide
Press and hold SOLO-IN-PLACE
The LED flashes and the console is armed ready for
solo operation. No mutes are affected.
The green SAFE/PREVIEW LEDs show which channels
are already 'solo safe'.
While holding SOLO-IN-PLACE press EDIT SAFES
Both the SOLO-IN-PLACE and EDIT SAFES LEDs flash
to show that the console is in 'edit safes' mode.
While holding both, press a channel MUTE switch.
The SAFE/PREVIEW LED toggles on or off to show if
the channel will be made safe.
Select all the mutes you wish to make safe.
The SAFE/PREVIEW LEDs will show these every time
you arm or operate Solo-In-Place.
Release EDIT SAFES to exit 'solo safe' mode ready to activate
Solo-In-Place, or
Release EDIT SAFES and SOLO-IN-PLACE to return the
console to normal operation.
Enter CONSOLE MODE by pressing SHIFT +
The display indicates So= (solo on)
While holding SHIFT +
Leave the display set for solo mode on or off :
So= (solo on) or
If you try to use Solo-In-Place while disabled the display will
indicate OFF and none of the console mutes will be affected.
together.
press RECALL
So
(solo off)
41

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents