EMS XtremeRGB-Ex1 User Manual page 9

Xtremergb range of video capture cards
Table of Contents

Advertisement

Separate Sync Polarity:
Sync On Green Polarity:
Inputs:
Unpacking
Your packing box should contain the following items:
1 x DVI to VGA Adapter
1 x low profile card bracket
Installation CD ROM
If there are any discrepancies, you should contact EMS immediately.
Note:
All plug-in cards are static sensitive and are packed in anti-static material. Please keep the
card in its packaging until you are ready to install.
It is recommended that you do not discard the packing box until you are completely satisfied
with the XtremeRGB-Ex1 capture card and it is fully installed and working correctly. We also
recommend that you make a note of the serial number of the card in a prominent place before
the card is plugged into the computer. This should hasten any query should you need to
contact our Technical Support Department. The serial number is displayed on the card itself
and the box label.
Positive or Negative. (Separate H & V sync, Composite Sync)
Negative
75 Ohm terminated

Advertisement

Table of Contents
loading

Related Products for EMS XtremeRGB-Ex1

This manual is also suitable for:

Xtremergb-ex2Xtremergb-iiXtremergb-ex4+Xtremergb-ex8

Table of Contents