EMS XtremeRGB-Ex1 User Manual page 44

Xtremergb range of video capture cards
Table of Contents

Advertisement

Specification
Board Format:
Connectors:
Maximum Sample Rate:
(RGB/DVI)
Video Sampling:
SD Maximum Capture
Resolution:
Video Capture Memory:
Analog RGB Mode Support:
DVI Single Link Mode Support:
HD Modes
Input Mode Detection:
Pixel Output Formats:
Update Rate:
Video Format Options:
Operating System Support
PCI-e x4 plug-in card, 110mm x 204mm
PCI-e bus master with scatter gather DMA providing maximum data rate of 480MB/s
One DVI-I type connector and one D-type connector for SD inputs
170Mpixels per second analog RGB or 165 MHz DVI
Analog modes up to 340MHz pixel clock can be captured using dual-pass sampling
RGB: 24 bits per pixel / 8-8-8 format
Video: 16bits per pixel/YUV format
720x576x16bit
64 MB, triple buffered
640x480, 800x600, 1024x768, 1280x1024, 1600x1200, 1920x1080, 2048x1536,
custom modes.
640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200, 1920x1080, 1900 x
1200, and custom modes.
1080p, 1080i, 720p, 576p, 576i, 480p and 480i using a Component HD-DVI Adapter
(HDCP not supported).
Automatic detection of input modes in hardware, enabling the tracking of mode
changes in the source signal.
RGB: 5-5-5, 5-6-5 or 8-8-8 (24bit/32bit) pixels.
YUV: 4:2:2
User defined, captured frame rate will match the source providing max data rate
(480MB/s) is not exceeded.
Multi-buffered to eliminate tearing artifacts
Analog RGB plus HSync and VSync (5 wire).
Analog RGB with Composite Sync (4 wire).
Analog RGB with Sync on Green (3 wire).
DVI Single Link.
PAL, NTSC, SECAM or S-Video for SD inputs
Windows® XP Professional (x32 and x64), Windows® Server 2003 (x32 and x64),
Windows Vista® (x32 and x64), Windows® Server 2008 (x32 and x64) and
Windows7®

Advertisement

Table of Contents
loading

Related Products for EMS XtremeRGB-Ex1

This manual is also suitable for:

Xtremergb-ex2Xtremergb-iiXtremergb-ex4+Xtremergb-ex8

Table of Contents