EMS XtremeRGB-Ex1 User Manual page 34

Introduction – XtremeRGB-Ex8
The XtremeRGB-Ex8 is an eight channel PCI express video capture card. The card supports PAL,
NTSC and SECAM in both composite and S-video input formats, supports de-interlaced video capture
and allows display at 25/30 frames/sec for real-time video overlays.
The Windows® software provided with the card allows the analog video signal to be captured and
displayed on your desktop.
Windows Media Encoder® may also be used to stream video across a network or save the video to
disk. Windows Media Player® can be used to display the stream or the video that has previously been
saved.
Hardware Overview
The XtremeRGB-Ex8 is an eight channel PCIe capture card and can capture up to 8x 720x576x16bit
from eight simultaneous capture channels for real time video overlays.
•
Four Lane PCI express video capture card
•
Eight simultaneous capture channels
•
Support for any mix of NTSC,PAL SECAM
•
Eight composite/S-Video video inputs
•
32MB on board frame buffer
•
Auto video mode and no-signal detection
•
Daisy chain input to output with selectable termination
•
High performance DMA with scatter gather
•
Data Transfer at 480MB/s
•
Supports up to 16 windows with any mix of input channels
•
SDK available for OEM customers
Models
XtremeRGB-Ex8