Table of Contents
Advertisement
Installing Multiple Cards
Up to 32 cards can be installed in a system providing a maximum of 64 capture channels using the
XtremeRGB-II. Combinations of XtremeRGB capture cards in the same machine are supported by
the driver.
In order to control the order in which the driver uses the cards, it is recommended when installing
multiple cards that the J6 Links are configured. Each card should be configured as follows:
DirectShow
If you change the link ordering after installation you must run dplinks.exe. This program will update
the existing input names used by the windows DirectShow interface.
To run the dplinks program open the Run by clicking on Start/Run and type
dplinks
and then
press Enter.
The program will run, however no notifications are displayed.
Advertisement
Table of Contents
