Calling Up The Menu; Menu Configurations (User 1/User 2) - TallyGenicom 5040 User Manual

Menu

Calling up the menu

PAPER
USER1 USER2
STOP
/EJECT
SETUP
Menu configurations
(User 1/User 2)
46
You can access the menu in the following way:
PAPER
USER2
USER1 STOP
/EJECT
SETUP
Every printer is shipped with factory default settings. Basic settings
such as emulation, character pitch, form length etc., which many appli-
cations make use of, are set. At the end of this chapter you will find a
menu printout (status page) (
shows the printer's default settings.
Your printer allows you to set and use two independent menu config-
urations (User 1 and User 2). If one of your applications for example
requires an IBM printer while another program demands an EPSON
printer, you can set an IBM emulation configuration with the desired
settings, and set the second configuration as an EPSON emulation.
Ensure the printer is powered off.
Power on the printer whilst holding the
USER1 key.
The printer initialises and the LCD displays
the message:
Status page (example)
User guide
, page 56) which