Grizzly H6362 Instruction Sheet

Introduction

This compact ⁄ " Reversible Air Drill features a
3
8
pistol grip handle, 1800 RPM free speed, and
⁄ " drilling capacity. Average air consumption is
3
8
6 CFM and the recommended air pressure is 90
PSI. Includes a ⁄ " NPT quick connect fitting and
1
4
chuck key.

Inventory

A. Air Drill ........................................................ 1
B.
⁄ " NPT Quick Connect Fitting (male) ........ 1
1
4
C. Chuck Key .................................................. 1

Lubricating Your New Air Drill

Lubricate your air drill with pneumatic tool oil. If
you do not have a lubricator installed in your air
line, place one drop of pneumatic tool oil into the
air fitting daily, as shown in Figure 2.
Damage to your eyes, lungs, and ears could
result from using this drill without proper
protective gear. Always wear safety glasses,
a respirator, and hearing protection while
drilling.
Need Help?
If you need help with your new air drill, call our
service department at: (570) 546-9663.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
COPYRIGHT © NOVEMBER, 2004 BY GRIZZLY INDUSTRIAL, INC.
#TR6752 PRINTED IN CHINA
⁄ " REVERSIBLE AIR
3
8
DRILL
MODEL H6362
INSTRUCTION SHEET
Model H6362.
Figure 1.
Lubricating the Model H6362.
Figure 2.