Grizzly H6139 Instruction Sheet

Always wear safety glasses
when using this tool to
prevent serious personal
Always disconnect tool from
air to prevent unexpected
operation during service.
Never exceed 120 PSI.
Introduction
Features include a pistol grip with trigger switch,
forward and reverse switch and
air inlet. The ⁄ " chuck accepts drill bits down
1
2
to ⁄ " and includes a chuck key. The auxiliary
1
64
handle can be positioned anywhere around the
drill body.
Inventory
A. Air Drill ........................................................ 1
B.
⁄ " NPT Quick Connect Fitting (male) ........ 1
1
4
C. Chuck Key .................................................. 1
D. Handle ........................................................ 1
E. Lock Collar ................................................. 1
Operation
Tool requires 90 PSI to operate correctly.
To improve tool lifespan, use a filter/lubricator/
regulator as shown in Figure 2. Otherwise, lubri-
cate daily with a couple drops of pneumatic tool oil
directly into the air fitting as shown in Figure 3.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
EYE INJURY HAZARD!
INJURY HAZARD!
EXPLOSION HAZARD!
⁄ " NPT female
1
4
COPYRIGHT © FEBRUARY, 2006 BY GRIZZLY INDUSTRIAL, INC.
#KM7955 PRINTED IN CHINA
MODEL H6139
⁄ " REVERSIBLE AIR
1
2
DRILL
INSTRUCTION SHEET
Figure 1.
Quick
Quick
Connector
Connector
Your
Tool
Quick
Coupler
Air Hose
Installing your tool.
Figure 2.
Lubricating directly into air fitting.
Figure 3.
If you need help with your new pneumatic tool,
call our Tech Support at: (570) 546-9663.
Model H6139.
Lubricator
Regulator
Air
Compressor
Quick
Filter
Coupler